Curious why the price for a broken coil can jump from under $100 to over $500? We ask this because homeowners deserve clear answers and fast service.
We are Garage Home Pros, a family team serving Polk, Osceola, Lake, Orange, and Seminole counties since 2014. Typical spring replacement runs $150–$400 per spring, all in, though installed ranges vary by type and site conditions.
Most straightforward jobs take about one hour. Heavier or insulated units need stronger parts and more setup time. Extra repairs, like cables or track tuning, can raise the final charge.
Call us at (321) 200-0727 or email garagehomepros@gmail.com for fast scheduling. We work Mon–Sat, 8:00 a.m.–9:00 p.m., with no after-hours fees and a focus on safe, lasting results.
Key Takeaways
- Average all-in cost is about $150–$400 per spring for most homes.
- Type of spring and door weight drive price and safety needs.
- Standard jobs usually take 1–1.5 hours when no extras are needed.
- Added parts like cables or tune-ups increase the final total.
- We inspect the full system to avoid repeat visits and ensure reliability.
- Local, family-owned pros available Mon–Sat with no after-hours fees.
At-a-Glance: Spring Replacement Costs Right Now
Price ranges vary widely based on part grade, installer travel, and warranty. Present installed ranges often sit at $98–$371 per unit, while contractor estimates in Oct 2025 show $315–$554 per spring depending on materials and local labor.
For most homeowners, a realistic total is about $150–$400 per spring, including materials and labor. Labor typically runs $75–$150+ per hour and most jobs finish in 1–1.5 hours.
- Materials-only: torsion springs $108–$150; extension springs $12–$50.
- Price gaps come from spring grade, warranty, disposal, travel, and itemized labor.
- Compare quotes by asking for written estimates that list parts, labor, and possible add-ons.
We provide transparent pricing and fast scheduling within our 20-mile service area. Call (321) 200-0727 for a clear estimate and friendly, no-pressure service.
how much to replace garage door spring: What Drives the Price
Cost differences come down to part type, door weight, and how many units need service.
Type matters: Torsion units carry higher parts and setup costs but handle heavier loads safely. Extension coils are cheaper up front and suit lighter tilt-up styles.
Door size, weight, and style
Sectional and roll-up doors usually need torsion hardware. Insulated or heavy panels require stronger components and raise the final cost.
Number of springs and doors
Single doors often use one or two springs. Double-wide or multi-door homes raise materials and labor but can be scheduled efficiently for the same visit.
Labor and local effects
Labor ranges typically $75–$150+ per hour and varies by travel, access, and added repairs. Remote areas or tight access points increase time and expense.
- We explain why type is the top factor: torsion offers strength and safety; extension is cost-effective for lighter doors.
- We outline door style impacts and number of units so you get a clear line-item estimate.
- We emphasize local scheduling and value—not only the lowest sticker price—balancing safety, durability, and total ownership cost.
Cost Breakdown: Parts, Labor, and Add-ons
Breaking costs into parts, labor, and extras helps you compare bids with confidence. We provide itemized estimates so you see exactly what each line covers and why it matters.
Materials
Materials-only pricing typically runs $108–$150 for a torsion spring and $12–$50 for an extension spring. Quality and cycle ratings affect longevity and value.
Labor and Time
Labor generally runs $75–$150+ per hour. Most jobs finish in 1–1.5 hours unless access or extra repairs add time.
All-in Example & Common Add-ons
Homewyse-style baselines commonly land near $315–$554 per unit all-in, depending on site conditions. Common add-ons include:
- Cable replacement: $98–$120
- Basic tune-up and lubrication: $45–$100
- Track repair or replacement: $147–$200
- Track realignment: $100–$175
We never add after-hours fees. We’ll review optional work before starting and recommend routine tune-ups to lower future costs and extend service life.
Torsion vs. Extension Springs: Price, Lifespan, and Value
Choosing the right coil type affects upfront price and long-term reliability. We walk you through installed price ranges, expected service life in years, and when a conversion makes sense for safety and performance.
Price ranges
Extension springs typically run about $98–$200 installed. Torsion springs usually sit between $192–$371 installed. These figures reflect materials, labor, and common site factors.
Durability and cycles
Torsion systems last longer, generally 8–15 years. Extension units often reach 7–12 years. Higher cycle ratings on torsion options (10,000–20,000 cycles) suit heavy or insulated garage door setups.
Conversions and value
Converting an extension setup to torsion improves balance, cuts noise, and reduces future service calls. The upfront cost is higher, but torsion provides better long-term value for frequent use or heavier doors.
- We compare installed prices so you see upfront differences.
- We size and install systems to manufacturer specs for maximum life.
- We document parts and adjustments so you have clear records.
When to Replace Both Springs—and Why It Saves Money
When one coil fails, the other often follows soon after. We recommend renewing matched units together on two-spring setups. This restores balance and prevents a quick repeat visit.
Balanced tension reduces wear. Matched parts age at similar rates. Swapping both ensures even tension and steadier movement. That limits uneven wear on cables, drums, and the opener.
Balanced tension, fewer callbacks, reduced opener strain
- Matched units keep lift forces even, improving operation and safety.
- Less strain on the motor means fewer premature failures and lower long-term cost.
- Paired work saves time and labor compared with two separate visits.
Set pricing expectations for single vs. double replacements
One-time dual replacements often carry a modest premium per unit. Still, the combined invoice usually beats the total of two separate calls. We’ll quote single and paired options so you can choose with clear costs and timing.
Signs Your Garage Door Springs Are Failing
A sudden snap or a door that tilts can stop your routine in an instant. These failures are often obvious and urgent.
Watch for loud bangs. A sharp noise usually means a broken coil and a door that is too heavy to lift safely.
Crooked travel or uneven movement points to uneven tension or a failing side component. This causes extra wear on cables and the opener.
Other common warning signs
- Squeaks or grinding from coils—friction and wear that call for inspection and maintenance.
- An opener that struggles or overheats—springs aren’t assisting properly and the motor can fail.
- Visible rust or corrosion—reduced life span and increased break risk over the years.
Do not force the door open. Stop using it and call us for safe, fast service: (321) 200-0727. A basic tune-up ($45–$100) can catch issues early and extend part life.
DIY vs. Professional Spring Replacement: Safety, Time, and Total Cost
Many homeowners underestimate the skill needed for safe work on high-tension systems. We urge caution and clear choices when handling these parts.
Why torsion work is not DIY-friendly
Torsion systems store a lot of energy. Special winding bars and precise steps are required. Mistakes can cause injury or bent panels.
How pro service prevents added repairs and extra labor costs
Our trained technician inspects cables, drums, bearings, and tracks during each visit. That catch often prevents repeat calls and hidden repair bills.
- Fewer hidden costs: Proper setup avoids bowed tracks and strained openers.
- Time saved: We source correct parts and finish work quickly, lowering labor exposure.
- Extension springs: Simpler, but still need safety cables and sizing for reliable operation.
We prioritize safety and accurate calibration. Call for clear scheduling and written pricing so you can pick the path that protects your home and limits replacement costs.
Local Help, Fast: Garage Home Pros Spring Replacement and Emergency Service
When access or safety is at risk, you need a local team that answers fast and works cleanly. We are family-owned since 2014 and focus on quick, clear service for homeowners across Polk, Osceola, Lake, Orange, and Seminole counties.
Hours & contact
Mon–Sat 8:00 a.m.–9:00 p.m.. Closed Sundays. Call (321) 200-0727 or email garagehomepros@gmail.com for same-week scheduling and emergency dispatch during business hours.
Service area & what we handle
We serve residences within a 20-mile radius and respond with stocked trucks. Our services include spring replacement, cable repairs, opener repair and replacement, track fixes, panels off track, and full installations.
Why choose us
- We prioritize emergency repairs that affect access and safety and offer dependable arrival windows.
- A trained technician inspects the full system and explains findings so you approve only needed work.
- We keep common parts on the truck to finish most replacements in a single visit.
- No after-hours fees during posted times and transparent, written pricing before we start.
- Family-owned since 2014, we stand behind our work with friendly, professional care.
Conclusion
A short inspection often saves money and extends component life. Typical spring replacement runs $150–$400 per unit, while present installed ranges sit near $98–$371 and contractor examples show $315–$554 depending on parts and labor.
Key factors are part type, door weight, and any extra repairs. Torsion setups last about 8–15 years and may reach 10,000–20,000 cycles. Extension setups often reach 7–12 years with 5,000–10,000 cycles. Add-ons like cables ($98–$120) and tune-ups ($45–$100) are common.
We’re ready with clear pricing, expert advice, and fast, friendly service. Call (321) 200-0727 or email garagehomepros@gmail.com to schedule your spring replacement today. A trained technician sizes parts, sets balance, and lowers future repair risks.
